Phone: 719.257.3490
  info@extensometry.com

REQUEST A QUOTE

Model CERHV High Resolution Extensometer Calibrator by Reliant Technology Three Model EAG General Purpose Axial Extensometers in various configurations Model EAG Axial Extensometer and Model ETG Transverse Extensometer for simultaneous strain measurement

Extensometers and Accessories for Materials Testing

Models to Cover Virtually Every Materials Testing Application
Model EAG General Purpose Axial Extensometers for tensile, compressive, and cyclic testing

Axial Extensometers

Models for Tensile, Compressive and Cyclic Strain Measurement

  • Large variety of gauge lengths and measuring ranges
  • Temperatures from -270 to +200 °C (-454 to +400 °F)
  • Models to cover tension, compression and cyclic testing
Model DG General Purpose Deflectometer for displacement and bending test measurement

Deflectometers

Measurement of Deflection, Compression, and Bending tests

  • Large variety of measuring ranges
  • Temperatures from -270 to +200 °C (-454 to +400 °F)
  • Custom brackets / mounts available
Model EDS Fracture Mechanics Clip-On COD Gauge for ASTM E1820 and E399 testing

Fracture Mechanics, COD Gages

For fatigue Crack Growth and Fracture Mechanics Tests

  • Large variety of gauge lengths and measuring ranges
  • Temperatures from -270 to +200 °C (-454 to +400 °F)
  • Bolt-on knife edges and accessories available


Model ETG Transverse and Diametral Extensometer for Poisson's ratio measurements

Transverse Extensometers

For Transverse or Diametral Strain Measurement

  • Designed for simultaneous use with an axial extensometer for Poisson's ratio tests
  • Temperatures from -270 to +200 °C (-454 to +400 °F)
  • Special anvils available for testing soft materials
Model EFSS High Temperature Self-Supported Furnace Extensometer for testing up to 1200°C

High Temperature Extensometers

For Testing at Elevated Temperatures

  • Large variety of gage lengths and measuring ranges
  • For use up to 1200 °C (2200 °F) without cooling
  • Test metals, composites, and ceramics heated with a furnace or an induction heating system
Model ETB Bolt Proof Test Extensometer for bolt yield and proof load testing

Bolt Proof Test Extensometers

Load Testing of Bolts and Similar, Yield / Proof Testing

  • Built-in mechanical over-travel stops and a break-away lower arm
  • Temperatures from -270 to +200 °C (-454 to +400 °F)
  • Gage length extension beams available for testing bolts greater than 150 mm (6.000") long
Model EAGM Miniature Axial Extensometer for testing small specimens

Miniature Axial Extensometers

Miniature Models for Testing Small Specimens

  • Large variety of gauge lengths and measuring ranges
  • Temperatures from -270 to +200 °C (-454 to +400 °F)
  • Models to cover tension, compression and cyclic testing
Model EAH High Elongation Extensometer for testing plastics, rubber, and elastomers

High Elongation Extensometers

Designed for Testing Plastics, Rubber, and Elastomers

  • Large variety of gage lengths and measuring ranges
  • Can be configured for low or high level output
  • Custom brackets / mounts available
Model CERHV High Resolution Extensometer Calibrator for ASTM E83 and ISO 9513 compliance

Extensometer Calibrators

For Calibration of Extensometers and Electronics

  • Two high resolution versions available
  • Large selection of adapters for transverse, COD gauge, etc.
  • Optional motorized version to automate your calibration process
Model EBA Bi-Axial Extensometer for simultaneous averaged axial and lateral strain measurement

Avg / Bi-Axial Extensometers

Averaged & Simultaneous Bi-Axial Measurement in One Integral Unit

  • Large variety of gauge lengths and measuring ranges
  • Temperatures from -270 to +200 °C (-454 to +400 °F)
  • Models to cover tension, compression and cyclic testing
Model CSA Analog Signal Conditioner for extensometers and transducers

Stand Alone Signal Conditioning

Signal Conditioners for Extensometers and Transducers

  • Highly adjustable for sensitivity, gain, filtering and output
  • NEMA 4 fully enclosed case
  • Output signal interface connectors for most controllers / test systems
Model ETVR r-Value Sheet Metal Extensometer for ASTM E517 and ISO 10113 plastic strain ratio testing

Sheet Metal Extensometer

For Measuring Plastic Strain Ratio of Sheet Metals

  • For r-Value measurement
  • Can be used simultaneously with a model EAG axial extensometer for ASTM E517 and ISO 10113
  • Temperatures from -270 to +200 °C (-454 to +400 °F)

Reliant Technology LLC.

327 Lovell Gulch Rd

Woodland Park, CO 80863 USA

+1-719-257-3490

Questions or Repair?

If you have any questions or would like a quote, please contact us HERE.

If your extensometer is in need of service or repair, please fill out an RMA form HERE.